Morin Standing Seam Series SLR-12 utilizes a wide, shallow ridging on each panel for a subtle appearance while providing panel strength. Designed with a concealed clip and fastener connection, SLR-12 is perfectly suited for new or retrofit projects. SLR-12 panels are an option for job site roll forming.
Lengths 5' (1.52m) to 40' (12.19m) standard Shorter and longer lengths available.
Deliver panel materials and components in the original, unopened, undamaged packaging with identification labels intact.
Store roof panel materials on dry, firm, and clean surface.
Elevate one end of bundle to allow moisture run-off, cover and ventilate to allow air to circulate and moisture to escape.
Install panels plumb, level, and true-to-line to dimensions and layout indicated on approved shop drawings.
Remove protective film immediately as per Morin's standard directions.
Cutting and fitting of panels shall be neat, square and true. Torch or abrasive cutting is prohibited.
Structural concealed fastener standing seam roof
Weather-resistant or rainscreen rear-ventilated application
3/4:12 with Seam Types of 90 or 180 degrees
Steel (Galvalume/Zincalume) - 20*(Fontana only), 22 and 24 GA Aluminum - 0.040 GA and 0.032 GA Special Note: Copper, Zinc and Stainless Steel options available dependent on the profile.
Standard (Fluropon® PVDF-Kynar500®) Premium Colors MICA (Fluropon Classic®II PVDF) Premium Colors METALLIC (Fluropon Classic®PVDF) Morin Custom Color Matching Services Other Finishes Available
Smooth surface standard; Stucco embossed texture optional; striated and pencil beads are available
Factory caulking standard
SLR Sliding and Fixed Clips available
Open framing or solid decking applications
SLR panels in 12" and 16" widths have FM approvals
Retro-fit is an ideal application for the SLR-12 panel
Design Options for 0, 1, 2 and 3 ribs
Design Option for SLR-12 Striated
Portable curving available down to 20° radius for some materials (contact your local MORIN representative for further information).
Bristol, CT, Fontana, CA and DeLand, FL
Air Infiltration: ASTM E-283 and ASTM E-1680 Water Penetration: ASTM E-331, ASTM E-1646 and ASTM E-2140 Structural Performance: ASTM E-330 and ASTM E-1592 Wind Uplift Test: TAS 125 (per UL580) Impact Testing-Florida Building Code Protocol: TAS 201 SLR12 and SLR16 have FM and UL approvals