Morin Matrix® Series MX2.0

Morin's Matrix® Series is the next evolution in integrated concealed fastener wall panel systems with a collective joint design resulting in multiple panel integration. The Morin Matrix® Series MX2.0 panel features an innovative and unique profile, accompanying extruded trims and MiterSeam corners, and delivers on award winning designs.

Lengths 5' (1.52m) to 30' (9.14m) standard Shorter and longer lengths available
Deliver panel materials and components in the original, unopened, undamaged packaging with identification labels intact. Store wall panel materials on dry, firm, and clean surface. Elevate one end of bundle to allow moisture run-off, cover and ventilate to allow air to circulate and moisture to escape. Install panels plumb, level, and true-to-line to dimensions and layout indicated on approved shop drawings. Remove protective film immediately as per Morin's standard directions. Cutting and fitting of panels shall be neat, square and true. Torch or abrasive cutting is prohibited.
Integrated Concealed Fastener
Weather-resistant or rainscreen rear-ventilated application
1 1/2"
38mm
12"
305mm
n/a
Painted Steel: Galvalume/Zincalume: 18 GA, 20 GA, 22 GA and 24 GA Aluminum: 0.050 GA and 0.040 GA Stainless Steel: 20 GA, 22 GA and 24 GA Zinc: 1.0mm and 0.8mm Natural Copper: 20 oz. and 16 oz.
Standard (Fluropon® PVDF-Kynar500®) Premium Colors MICA (Fluropon Classic®II PVDF) Premium Colors METALLIC (Fluropon Classic®PVDF) Morin Custom Color Matching Services Other Finishes Available
Smooth surface standard, stucco embossed texture optional
Optional factory caulking available
Morin Matrix® Series Clip
Open framing or other various backup wall assemblies (i.e. ext. sheathing, air/water barrier, exterior insulation)
3/8" holes x 9/16" oc (40% open) 1/8" holes x 3/16" oc (40% open) 1/8" holes x 7/32" oc (30% open) 1/4" holes x 1/2" oc (23% open) 1/8" holes x 1/4" oc (23% open) 1/8" holes x 3/8" oc (10% open)
The Morin Matrix® Series features four unique profiles. Collective joint design allows for multiple panel integration. Metal Panel Cladding Option #1 - Sealed Panel Joints for maximum weather protection with minimal venting at base and coping Metal Cladding Option #2 - Unsealed Panel Joints for rainscreen rear-ventilated with maximum venting through panel joints, base and coping. Horizontal or Vertical application MiterSeam Corners (outside or inside) - 2'x2' standard Splice Plates Extrusions and formed trim
Bristol, CT and Fontana, CA
Structural Performance: ASTM E1592
44 1/4" East, 44 1/2" West
Galvalume AZ-50 & Galvalume Plus AZ-55: 22 ga. (.029) = 1.83# psf 20 ga. (.035) = 2.19# psf
Aluminum (3003 - H14): .040 (18 ga.) = 0.82# psf .050 (16 ga.) = 1.03#psf
Stainless Steel (304-2B) • 24 ga.(.023) = 1.48# psf • 22 ga. (.029) = 1.84# psf • 20 ga. (.036) = 2.28# psf
Copper (Mill Finish) 16 oz. (.0216) = 1.46# psf 20 oz. (.0270) = 1.83# psf
VM Zinc or Rheinzink 0.8 mm (22 ga.) = 1.73# psf 1.0 mm (20 ga.) = 2.16# psf
Fluropon - 20 solid colors (Low Gloss) (1.0 mil - 2 coat) Fluropon Classic II - 5 mica colors (1.0 mil - 2 coat) Fluropon Classic - 4 metallic colors (1.5 mil- 3 coat) All material has 0.5 mil. Off White backer
Optional Off White Butyl (Non- Hardening) available
E-5 Directional Pattern; Aztec Stucco Pattern EAST Only
Closure MX2.0 Outside Metal 1'-0" long east, 1'-0" long west Closure MX2.0 Outside Foam 100 pcs per ctn (3'-0" long) Closure MX2.0 Inside Metal -Left 1'-0" long Closure MX1.0 Inside Metal -Right 1'-0" long Closure MX2.0 Inside Foam 100 pcs per ctn (1'-0" long)
1 1/2" DEEP EXTRUSIONS
Clip Matrix® / Integrity / S-16 - galv (used on steel panels) 400 pcs per ctn Clip Matrix® / Integrity / S-16 - S/S (used on alum panels) 400 pcs per ctn Starter Clip/Cleat (10'-0"long) Formed Trim
12" long (std. length) Install behind panel with pop rivets and seal as req'd
Mitered Seamed Corners 2'-0"x 2'-0" 90 deg. Minimum 70° (closed) Maximum 135° (open) outside or inside Max. length of leg 6'-0" long perforated to be cut and bent - no glue
N/A
N/A
34 pieces east, 18 pieces west; 3 bndls wide on trailer 4 bndls high on trailer
30 1/4"W x 16 3/4"H
140 sqs.
3/8" holes x 9/16" oc (40% open) 1/8" holes x 3/16" oc (40% open) 1/8" holes x 7/32" oc (30% open) 1/4" holes x 1/2" oc (23% open) 1/8" holes x 1/4" oc (23% open) 1/8" holes x 3/8" oc (10% open)
# 12 x 1 1/4" Tek 5 n/w (clip to steel) Fasten clip to structural steel with one fastener # 12 x 1 1/4" Tek 5 n/w 400 S/S Fasten clip to structural steel with one fastener # 12 x 1" Tek 3 n/w (clip to Sheet. Mtl) Fasten clip to light ga. steel with one fastener # 12 x 1" Tek 3 n/w 400 S/S Fasten clip to light ga. steel with one fastener # 14 x 1 1/2" type A n/w (no color) Fasten clip to wood with one fastener #44 Pop Rivet 1/8" 400 S/S Fasten trim and splice plates to panels
Limited Finish Warranty 1 to 20 year Available at no charge (check specs for req'd years) Limited Material Warranty 1 to 20 year Available at no charge (check specs for req'd years) Limited (Wall) Weather Tight Warranty 1 to 20 year Available at addt'l charge (inspections/review of shop dwgs req'd)

Images:


Rending (3D) Image
Profile Image
Project Image 1
Project Image 2
Project Image 3
Project Image 4