Morin SymmeTry® Series SYM2.0-18

SymmeTry® Series, a structural mechanically seamed roof, symmetrical and hydrostatic by design. Options for architects include four panel depths and three cover widths.

Lengths 5' (1.52m) to 45' (13.72m) standard Shorter and longer lengths available. Jobsite roll forming of panels in continuous lengths so as to eliminate panel end laps
Deliver panel materials and components in the original, unopened, undamaged packaging with identification labels intact. Store roof panel materials on dry, firm, and clean surface. Elevate one end of bundle to allow moisture run-off, cover and ventilate to allow air to circulate and moisture to escape. Install panels plumb, level, and true-to-line to dimensions and layout indicated on approved shop drawings. Remove protective film immediately as per Morin's standard directions. Cutting and fitting of panels shall be neat, square and true. Torch or abrasive cutting is prohibited.
Structural concealed fastener standing seam roof or wall
Weather-resistant or rainscreen rear-ventilated application
2"
51mm
18"
457mm
1/2:12
Steel - Galvalume/Zincalume 20, 22, 24 GA Aluminum - 0.050 GA and 0.040 GA
Standard (Fluropon® PVDF-Kynar500®) Premium Colors MICA (Fluropon Classic®II PVDF) Premium Colors METALLIC (Fluropon Classic®PVDF) Morin Custom Color Matching Services Other Finishes Available
Smooth surface standard
Factory applied hot melt sealant required
SymmeTry® Series Clip
Open framing or solid decking applications
Unlimited thermal expansion/contraction Watertight Seam from eave to ridge Significant wind uplift capability Jobsite roll forming of panels in continuous lengths so as to eliminate panel end laps
Bristol, CT, Fontana, CA, DeLand, FL And Onsite Roll Forming
ASTM E1592 Uplift Test UL 580, UL 1897 Uplift Test FM 4471 over open framing Uplift Test FM 4471 over metal deck Uplift Test UL Class A Fire Rating FM Class 1-SH Hail Resistance Test ASTM E1680 Air Infiltration Test ASTM E1646 Water Infiltration Test ASTM E2140 Static Water Test ASTM E1592 Uplift Test UL 580, UL 1897 Uplift Test FM 4471 over open framing Uplift Test FM 4471 over metal deck Uplift Test UL Class A Fire Rating FM Class 1-SH Hail Resistance Test ASTM E1680 Air Infiltration Test ASTM E1646 Water Infiltration Test ASTM E2140 Static Water Test
See Milewski
Galvalume AZ-50 & Galvalume Plus AZ-55 & Zincalume 24 ga. (.023) = 1.46 # psf 22 ga. (.029) = 1.83# psf 20 ga. (.035) = 2.19# psf
Aluminum (3003 - H14) .040 (18 ga.) = 0.82# psf .050 (16 ga.) = 1.03#psf
n/a
n/a
n/a
Fluropon - 20 solid colors (Low Gloss) (1.0 mil - 2 coat) Fluropon Classic II - 5 mica colors (1.0 mil - 2 coat) Fluropon Classic - 4 metallic colors (1.5 mil- 3 coat) All material has 0.5 mil. Off-White backer
Factory applied hot melt sealant required
n/a
n/a
n/a
SymmeTry® Series Clip required
n/a
n/a
n/an
n/a
Consult with Sales Office for available options and uses.
Deckfast supplied in a variety of lengths # 12 x 1 1/4" Tek 5 n/w (clip to steel) # 12 x 1 1/2" Tek 5 n/w 400 S/S # 12 x 1 Tek 3 n/w (clip to Sheet. Mtl) # 12 x 1" Tek 3 n/w 400 S/S #44 Pop Rivet 1/8" 400 S/S
Limited Finish Warranty 1 to 20 year Available at no charge (check specs for req'd years) • Limited Material Warranty 1 to 20 year Available at no charge (check specs for req'd years) • Limited (Roof) Weather Tight Warranty 1 to 20 year Available for addt'l charge (inspection and shop dwgs review req'd)

Images:


Rending (3D) Image
Profile Image