Morin MorZip® Series, a dual purpose roof and wall system that provides a seamless transition from roof to wall and back again. Available as MorZip® Naturals in copper, zinc, stainless steel and mill finish aluminum or as MorZip® Painted Metals in both aluminum or Galvalume/Zincalume.
Lengths 5' (1.52m) to 40' (12.19m) standard Shorter and longer lengths available; Jobsite roll forming of panels in continuous lengths so as to eliminate panel end laps
Deliver panel materials and components in the original, unopened, undamaged packaging with identification labels intact.
Store panel materials on dry, firm, and clean surface. Note: special packaging and storage instructions for copper and zinc panels.
Elevate one end of bundle to allow moisture run-off, cover and ventilate to allow air to circulate and moisture to escape.
Install panels plumb, level, and true-to-line to dimensions and layout indicated on approved shop drawings.
Remove protective film immediately as per Morin's standard directions.
Cutting and fitting of panels shall be neat, square and true. Torch or abrasive cutting is prohibited.
Structural concealed fastener standing seam roof or wall
Weather-resistant or rainscreen rear-ventilated application
Painted Metals: Painted Steel - Galvalume/Zincalume 20 and 22 GA Painted Aluminum - 0.050 and 0.040 GA Naturals: Bare Aluminum-0.050 and 0.040 GA Stainless Steel - 20 GA, and 22 GA Zinc - 1.0mm and Natural Copper- 20 oz.
Standard (Fluropon® PVDF-Kynar500®) Premium Colors MICA (Fluropon Classic®II PVDF) Premium Colors METALLIC (Fluropon Classic®PVDF) Morin Custom Color Matching Services Other Finishes Available
Mechanically seamed side lap provides unsurpassed weather-tightness at slopes as low as ?:12.
Hidden clip fastening eliminates need for through fasteners. MorZip® panels contain various levels of recycled content with all panels being 100% recyclable at the end of their useful life.
Design Options for 2 ribs from Bristol and Fontana
Design Options for 0 or 2 ribs from DeLand portable rollformer
Bristol, CT, Fontana, CA, DeLand, FL And Onsite Roll Forming
Fluropon - 20 solid colors (Low Gloss) (1.0 mil - 2 coat) Fluropon Classic II - 5 mica colors (1.0 mil - 2 coat) Fluropon Classic - 4 metallic colors (1.5 mil- 3 coat) All material has 0.5 mil. Off-White backer
Off White Butyl (Non- Hardening)
E-5 Directional Pattern; Aztec Stucco Pattern EAST Only
Clip galv (used on steel panels) 600 pcs per ctn Clip S/S (used on alum, copper and zinc ) 600 pcs per ctn Starter Clip/Cleat (10'-0"long) Formed Trim
Mitered Seamed Corners 2'-0"x 2'-0" 90 deg. Minimum 70° (closed) Maximum 135° (open) outside or inside Max. length of leg 6'-0" long
20 pieces. 4 bndls wide on trailer 3 bndls high on trailer
22 1/4"W x 16 3/4"H
Consult with Sales Office for available options and uses.
# 12 x 1 1/4" Tek 5 n/w (clip to steel) # 12 x 1 1/2" Tek 5 n/w 400 S/S # 12 x 1 Tek 3 n/w (clip to Sheet. Mtl) # 12 x 1" Tek 3 n/w 400 S/S #44 Pop Rivet 1/8" 400 S/S
Limited Finish Warranty 1 to 20 year Available at no charge (check specs for req'd years) Limited Material Warranty 1 to 20 year Available at no charge (check specs for req'd years) Limited (Roof) Weather Tight Warranty 1 to 20 year Available for addt'l charge (inspection and shop dwgs review req'd)