Morin Integrity Series S-16

Morin's Integrity Series is an integrated concealed fastener wall panel system. With its common joint design allowing for multiple panel integration, Morin's S-16 Integrity Series panel is specified for both new and retrofit projects.

Lengths 5' (1.52m) to 30' (9.14m) standard Shorter and longer lengths available
Deliver panel materials and components in the original, unopened, undamaged packaging with identification labels intact. Store wall panel materials on dry, firm, and clean surface. Elevate one end of bundle to allow moisture run-off, cover and ventilate to allow air to circulate and moisture to escape. Install panels plumb, level, and true-to-line to dimensions and layout indicated on approved shop drawings. Remove protective film immediately as per Morin's standard directions. Cutting and fitting of panels shall be neat, square and true. Torch or abrasive cutting is prohibited
Integrated concealed fastener
Weather-resistant or rainscreen rear-ventilated application
7/8"
22mm
16"
406mm
n/a
Painted Steel: Galvalume/Zincalume 18 GA thru 24 GA Aluminum: 0.050 GA and 0.040 GA Stainless Steel: 20 GA, 22 GA and 24 GA Zinc: 1.2mm, 1.0mm and 0.8mm Natural Copper: 20 oz. and 16 oz.
Standard (Fluropon® PVDF-Kynar500®) Premium Colors MICA (Fluropon Classic®II PVDF) Premium Colors METALLIC (Fluropon Classic®PVDF) Morin Custom Color Matching Services Other Finishes Available
Smooth surface standard Stucco embossed texture optional
Optional factory sealant available
Integrity Series Clip
Open framing or other various backup wall assemblies (i.e. ext. sheathing, air/water barrier, exterior insulation)
The Complete Integrity Series features 13 unique profiles. Collective joint design allows for multiple panel integration. Metal Panel Cladding Option #1 - Sealed Panel Joints for maximum weather protection with minimal venting at base and coping Metal Cladding Option #2 - Unsealed Panel Joints for rainscreen rear-ventilated with maximum venting through panel joints, base and coping. Horizontal, vertical or diagonal application Mitered Seam Corners (outside or inside) - 2'x2' standard ˆ™Splice Plates or Field Notch and Lap technique ˆ™Formed trim and optional extrusions
Bristol, CT
Air Infiltration: ASTM E283 Air Leakage: ASTM E-1680-95 Water Penetration: ASTM E331; E1648-95 Structural Performance: ASTM E330 and E1592 Impact Testing-Florida Product Approvals: ASTM E1996/ E1886; SBCCI; TAS201, 202, 203
47 1/4" East
Galvalume AZ-50 & Galvalume Plus AZ-55 24 ga. (.023) = 1.46 # psf 22 ga. (.029) = 1.83# psf 20 ga, (.035) = 2.19# psf 18 ga. (.047) = 2.92# psf
Aluminum (3003 - H14) .040 (18 ga.) = 0.82# psf .050 (16 ga.) = 1.03#psf
Stainless Steel (304-2B) • 24 ga.(.023) = 1.48# psf • 22 ga. (.029) = 1.84# psf • 20 ga. (.035) = 2.21# psf
Copper (Mill Finish) 16 oz. (.0216) = 1.46# psf 20 oz. (.0270) = 1.83# psf
VM Zinc or Rheinzink 0.8 mm (22 ga.) = 1.73# psf 1.0 mm (20 ga.) = 2.16# psf 1.2 mm (18 ga.) = 2.59# psf
Fluropon - 20 solid colors (Low Gloss) (1.0 mil - 2 coat) Fluropon Classic II - 5 mica colors (1.0 mil - 2 coat) Fluropon Classic - 4 metallic colors (1.5 mil - 3 coat) All material has 0.5 mil. Off white backer
Optional Off White Butyl (Non- Hardening) available
E-5 Directional Pattern; Aztec Stucco Pattern EAST Only
Closure S-16 Outside Metal - Left & Right the same (reversible) - 16'' long; Closure S-16 Outside Foam (use C-37 7/8") 115 pcs per ctn (345 lf.@3'-0" long); Closure S-16 Inside Metal -Left 16" long; Closure S-16 Inside Metal -Right 16" long; Closure S-16 Inside Foam 16" long
7/8" DEEP EXTRUSIONS as an available option
Clip Matrix® / Integrity / S-16 - galv (used on steel panels) 400 pcs per ctn; Clip Matrix® / Integrity / S-16 - S/S (used on alum panels) 400 pcs per ctn; Starter Clip/Cleat (10'-0"long)Formed Trim
12" long (std. length) Install behind panel with pop rivets and seal as req'd
Mitered Seamed Corners 2'-0"x 2'-0" 90° Minimum 70° (closed) Maximum 135° (open); outside or inside Max. length of leg 6'-0" long; perforated to be cut and bent only - no glue
S-16 std. 2" notched end yes; 3" available - confirm notch left or right
n/a
30 pieces; 4 bndls wide on trailer-3 bndls high on trailer
22 1/4"W x 20 3/4"H
125 sqs.
3/8" holes x 9/16" oc (40% open) 1/8" holes x 3/16" oc (40% open) 1/8" holes x 7/32" oc (30% open) 1/4" holes x 1/2" oc (23% open) 1/8" holes x 1/4" oc (23% open) 1/8" holes x 3/8" oc (10% open)
# 12 x 1 1/4" Tek 5 n/w (no color )Fasten clip to structural steel with one fastener # 12 x 1 1/4" Tek 5 n/w 400 S/S (no color)Fasten clip to structural steel with one fastener # 12 x 1" Tek 3 n/w (no color)Fasten clip to light ga. steel with one fastener # 12 x 1" Tek 3 n/w 400 S/S (no color) Fasten clip to light ga. steel with one fastener # 14 x 1 1/2" type A n/w (no color) Fasten clip to wood with one fastener #44 Pop Rivet 1/8" 400 S/S (painted) Fasten trim and splice plates to panels
Limited Finish Warranty 1 to 20 year Available at no charge (check specs for req'd years) Limited Material Warranty 1 to 20 year Available at no charge (check specs for req'd years) Limited (Wall) Weather Tight Warranty 1 to 20 year Available for addt'l charge (inspections/review of shop dwgs req'd)

Images:


Rending (3D) Image
Profile Image
Project Image 1
Project Image 2
Project Image 3