Morin Standing Seam Series SLR-16

Morin Standing Seam Series SLR-16 utilizes a wide, shallow ridging on each panel for a subtle appearance while providing panel strength. Designed with a concealed clip and fastener connection, SLR-16 is perfectly suited for new or retrofit projects. SLR-16 panels are an option for job site roll forming.

Lengths 5' (1.52m) to 40' (12.19m) standard Shorter and longer lengths available; Jobsite roll forming of panels in continuous lengths so as to eliminate panel end laps
Deliver panel materials and components in the original, unopened, undamaged packaging with identification labels intact. Store roof panel materials on dry, firm, and clean surface. Elevate one end of bundle to allow moisture run-off, cover and ventilate to allow air to circulate and moisture to escape. Install panels plumb, level, and true-to-line to dimensions and layout indicated on approved shop drawings. Remove protective film immediately as per Morin's standard directions. Cutting and fitting of panels shall be neat, square and true. Torch or abrasive cutting is prohibited.
Structural concealed fastener standing seam roof
Weather-resistant or rainscreen rear-ventilated application
2"
51mm
16"
406mm
3/4:12 with Seam Types of 90 or 180 degrees
Steel (Galvalume/Zincalume) - 20*, 22 and 24 GA *Fontana only Aluminum - 0.040 GA and 0.032 GA Special Note: Copper, Zinc and Stainless Steel options available dependent on the profile.
Standard (Fluropon® PVDF-Kynar500®) Premium Colors MICA (Fluropon Classic®II PVDF) Premium Colors METALLIC (Fluropon Classic®PVDF) Morin Custom Color Matching Services Other Finishes Available
Smooth surface standard; Stucco embossed texture optional; striated and pencil beads are available
Factory caulking standard
SLR Sliding and Fixed Clips available
Open framing or solid decking applications
SLR panels in 12" and 16" widths have FM approvals Concealed clip and fastener design Retro-fit is an ideal application for the Standing Seam Roof Panel Portable curving available down to 20° radius for some materials (contact your local MORIN representative for further information).
Bristol, CT, Fontana, CA and DeLand, FL
Air Infiltration: ASTM E-283 and ASTM E-1680 Water Penetration: ASTM E-331, ASTM E-1646 and ASTM E-2140 Structural Performance: ASTM E-330 and ASTM E-1592 Wind Uplift Test: TAS 125 (per UL580) Impact Testing-Florida Building Code Protocol: TAS 201 SLR12 and SLR16 have FM and UL approvals
East: 44 1/4"; South: 44 1/4"; West: 44 1/2"
Galvalume AZ-50 & Galvalume Plus AZ-55 & Zincalume 24 ga. (.023) = 1.46 # psf 22 ga. (.029) = 1.83# psf 20 ga. (.035) = 2.19# psf * Fontana only
Aluminum (3003 - H14) .032 (20ga.) = 0.66# psf .040 (18 ga.) = 0.82# psf
*The production of SLR in Copper, Zinc or Stainless Steel is dependent upon the substrate gauge and must be confirmed by MORIN Technical Department
*The production of SLR in Copper, Zinc or Stainless Steel is dependent upon the substrate gauge and must be confirmed by MORIN Technical Department
*The production of SLR in Copper, Zinc or Stainless Steel is dependent upon the substrate gauge and must be confirmed by MORIN Technical Department
Fluropon - 20 solid colors (Low Gloss) (1.0 mil - 2 coat) Fluropon Classic II - 5 mica colors (1.0 mil - 2 coat) Fluropon Classic - 4 metallic colors (1.5 mil- 3 coat) All material has 0.5 mil. Off-White backer
Off White Butyl (Non- Hardening)
E-5 Directional Pattern; Aztec Stucco Pattern EAST Only
See Milewski
n/a
Clip galv 2 piece sliding:Galvanized base/galvanized 22ga. Clip; Clip S/S 2 piece: Galvanized base/ SS 22ga. Clip
BEARING PLATES 6" X 6" with slots, 22 ga.
n/a
n/a
n/a
26 pieces EAST; 22 pieces WEST; EAST: 3 bndls wide on trailer; WEST: 4 bundles wide on trailer
22 1/4"W x 16 3/4"H
125 sqs.
Consult with Sales Office for available options and uses.
# 12 x 1 1/4" Tek 5 n/w (clip to steel) # 12 x 1 1/2" Tek 5 n/w 400 S/S # 12 x 1 Tek 3 n/w (clip to Sheet. Mtl) # 12 x 1" Tek 3 n/w 400 S/S #44 Pop Rivet 1/8" 400 S/S
Limited Finish Warranty 1 to 20 year Available at no charge (check specs for req'd years) Limited Material Warranty 1 to 20 year Available at no charge (check specs for req'd years) Limited (Roof) Weather Tight Warranty 1 to 20 year Available for addt'l charge (inspection and shop dwgs review req'd)

Images:


Rending (3D) Image
Profile Image
Project Image 1
Project Image 2
Project Image 3