Morin Standing Seam Series SCR-18

Lengths 5' (1.52m) to 40' (12.19m) standard Shorter and longer lengths available.
Deliver panel materials and components in the original, unopened, undamaged packaging with identification labels intact. Store roof panel materials on dry, firm, and clean surface. Elevate one end of bundle to allow moisture run-off, cover and ventilate to allow air to circulate and moisture to escape. Install panels plumb, level, and true-to-line to dimensions and layout indicated on approved shop drawings. Remove protective film immediately following installation as per Morin's standard directions. Cutting and fitting of panels shall be neat, square and true. Torch or abrasive cutting is prohibited.
Architectural design concealed fastener standing seam roof
1"
25mm
18"
457mm
3:12
Steel (Galvalume/Zincalume) - 18, 20, 22 and 24 GA Aluminum - 0.050 and 0.040 GA Special Note: Copper, Zinc and Stainless Steel options available dependent on the profile.
Standard (Fluropon® PVDF-Kynar500®) Premium Colors MICA (Fluropon Classic®II PVDF) Premium Colors METALLIC (Fluropon Classic®PVDF) Morin Custom Color Matching Services Other Finishes Available
Smooth surface standard; Stucco embossed texture optional
Factory caulking standard
SCR Clips available
Solid substrate required
These metal roofing systems are non-mechanically seamed and designed to shed rain water. As such, a minimum pitch of 3:12 is required for this category of metal roof panels. The SCR profile is elegantly simple with only the low-profile standing seams creating shadow lines.
Fontana, CA
Air Infiltration: ASTM E-283 Water Penetration: ASTM E-331 Structural Performance: ASTM E-1592 Wind Uplift Test: TAS 125-03 (UL580) Impact Testing: Class 1 -SH Hail Damage Resistance
West: 18" - 46 7/8"
Galvalume AZ-50 & Galvalume Plus AZ-55 & Zincalume 24 ga. (.023) = 1.46 # psf 22 ga. (.029) = 1.83# psf 20 ga. (.035) = 2.19# psf 18 ga. (.047) = 2.92# psf
Aluminum (3003 - H14) .040 (18 ga.) = 0.82# psf .050 (16 ga.) = 1.03#psf
*The production of SCR in Copper, Zinc or Stainless Steel is dependent upon the substrate gauge and must be confirmed by MORIN Technical Department
*The production of SCR in Copper, Zinc or Stainless Steel is dependent upon the substrate gauge and must be confirmed by MORIN Technical Department
*The production of SCR in Copper, Zinc or Stainless Steel is dependent upon the substrate gauge and must be confirmed by MORIN Technical Department
Fluropon - 20 solid colors (Low Gloss) (1.0 mil - 2 coat) Fluropon Classic II - 5 mica colors (1.0 mil - 2 coat) Fluropon Classic - 4 metallic colors (1.5 mil- 3 coat) All material has 0.5 mil. Off-White backer
Off White Butyl (Non- Hardening)
E-5 Directional Pattern; Aztec Stucco Pattern EAST Only
See Milewski
n/a
Clip galv 2 piece sliding:Galvanized base/galvanized 22ga. Clip; Clip S/S 2 piece; Galvanized base/ SS 22ga. Clip
n/a
n/a
n/an
n/a
22 pieces; 4 bndls wide on trailer 3 bndls high on trailer
22 1/4"W x 16 3/4"H
125 sqs.
Consult with Sales Office for available options and uses.
# 12 x 1 1/4" Tek 5 n/w (clip to steel) # 12 x 1 1/2" Tek 5 n/w 400 S/S # 12 x 1 Tek 3 n/w (clip to Sheet. Mtl) # 12 x 1" Tek 3 n/w 400 S/S #44 Pop Rivet 1/8" 400 S/S
Limited Finish Warranty 1 to 20 year Available at no charge (check specs for req'd years) Limited Material Warranty 1 to 20 year Available at no charge (check specs for req'd years) Limited (Roof) Weather Tight Warranty 1 to 20 year Available for addt'l charge (inspection and shop dwgs review req'd)

Images:


Rending (3D) Image