Morin Standing Seam Series SCR-18

These metal roofing systems are non-mechanically seamed and designed to shed rain water. As such, a minimum pitch of 3:12 is required for this category of metal roof panels. The SCR profile is elegantly simple with only the low-profile standing seams creating shadow lines.
Production: Lengths 5' (1.52m) to 40' (12.19m) standard Shorter and longer lengths available.
Application:
Materials: Steel (Galvalume/Zincalume) - 18, 20, 22 and 24 GA Aluminum - 0.050 and 0.040 GA Special Note: Copper, Zinc and Stainless Steel options available dependent on the profile.
Color: Standard (Fluropon® PVDF-Kynar500®) Premium Colors MICA (Fluropon Classic®II PVDF) Premium Colors METALLIC (Fluropon Classic®PVDF) Morin Custom Color Matching Services Other Finishes Available
Surfaces: Smooth surface standard; Stucco embossed texture optional
Perforations:

ASSEMBLY

Sealant: Factory caulking standard
Substrate: Solid substrate required
Clips: Clip galv 2 piece sliding:Galvanized base/galvanized 22ga. Clip; Clip S/S 2 piece; Galvanized base/ SS 22ga. Clip
Corners: n/a
Notched Ends: n/an
Testing: Air Infiltration: ASTM E-283 Water Penetration: ASTM E-331 Structural Performance: ASTM E-1592 Wind Uplift Test: TAS 125-03 (UL580) Impact Testing: Class 1 -SH Hail Damage Resistance
 
Mfg Facilities: Fontana, CA

The information contained in this MORIN Technical Specication Sheet (TSS) and any accompanying typical detail sheets is reliable and correct, but is subject to change without notice. Typical details are meant to show the products of the seller in a manner which is representative of the way in which they are installed. It is the responsibility of the buyer or his or her architect or engineer to verify that any product is suitable for the conditions and use intended and that the products are compatible with a any other material.

Printed April 08, 2020, 06:53 am

www.MorinCorp.com
800.640-9501